| |
|
Fully automated CT inspection system "HeiDetect XS CT"
|
HeiDetect
XS CT is a fully automated inline CT inspection system for
workpieces of varying size and weight. The system consists
of a compact X-ray enclosure with high-performance X-ray
tubes and the Fraunhofer X-ray camera system, the XEye 4020.
The fully automated inspection of the 3D data is performed
using the Fraunhofer PIDA software. This versatile
inspection system from Heitec PTS GmbH adapts perfectly to
your individual requirements. This applies both to
integration in an existing material flow and communication
with the production IT system.
HeiDetect XS CT can also be loaded directly from a handling
system supplied by the customer. The intake opening for the
handling systems can be positioned and configured flexibly. Optionally, both the X-ray tubes and the
detectors can also be fitted on one axis system. This allows
for adjustment of the focus-to-detector distance and the
focus-to-object distance depending on the workpiece to be
inspected.
Secure, flexible and
efficient system technology
The gripper fingers of the robot, and where applicable, the
component pick-up by the transport system, can be adapted to
the respective product and are thus the only parts to be
replaced during a product change. Other functions such as
lasering and labelling can easily be integrated.
The detector from the Fraunhofer EZRT shows no signs of
degradation, replacement will not be necessary until it has
been in use for at least ten years.
|
|
 |
|
|
The following operating modes are possible with HeiDetect XS
CT: |
 |
PIDA Axial CT Robot: The
system will be equipped with a 6-axis industry robot
according to the customer´s wishes. |
|
|
PIDA Axial CT: The
inspection cabin is operated via a handling system provided
by the customer. |
|
Inspection system (without
robot or conveyor technology) |
|
Length |
2,000 mm |
|
Width |
1,300 mm |
|
Height |
1,020 mm |
|
Weight |
approx. 1.5 t |
|
Inspection system |
|
|
Type |
XEye 4020 |
|
Active Surface |
400 - 200 mm |
|
Pixel size |
50 μm - 400 μm
(edge length) |
|
COMET MXR-160HP/11 (160
kV, 1.8 kW) |
|
COMET MXR-225HP/11 (225
kV, 1.8 kW) |
(Other tubes on request) |
|
|
Fully automated 3D
data analysis |
|
Fraunhofer PIDA (Process
Integrated Defect Analysis) |
|
KUKA LBR iiwa |
7 kg or 14 kg |
|
KUKA Agilus |
up to 10 kg |
(Other robot
manufacturers and sizes
on request) |
|
Part dimensions for
XS version |
|
Diameter |
max. 150 mm
around rotational
axis |
|
Length |
max. 350 mm |
|
Weight |
depends on the
used robot |
|
|
